Use Adj. Value
Set Exec. Guide
Repl. maint cart
DNS Dync update
When paper is set in the printer, the history of effective color
calibration for the set paper is displayed.
When paper is not set in the printer, the latest history among
common calibration or unique calibration is displayed.
Also, a hyphen (-) is displayed when there are no execution re-
(See "Color Calibration Using the Printer Sensor.")
(See "Paper that can be used in Color Calibration.")
Choose Disabled > OK if you prefer not to apply the color cali-
bration adjustment value in print jobs. However, printer driver
settings are given priority.
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Clear the color calibration adjustment value and the execution
Clean the Printhead. (See "Cleaning the Printhead.")
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if printing
is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Execute when replacing the Printhead. Follow the instructions
displayed to complete the required procedure. (See "Replacing
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Execute when replacing the Maintenance Cartridge. Follow the
instructions displayed to complete the required procedure.
(See "Replacing the Maintenance Cartridge.")
Indicates information about the printhead.
Move the Carriage in preparation for cleaning the Platen.
Specify the timeout period before cancellation of print jobs that
cannot be received by the printer.
Choose whether the printer IP address is configured automati-
cally or a static IP address is entered manually.
Specify the protocol used to configure the IP address automati-
Specify the printer network information when using a static IP
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
The value that was automatically configured is displayed if you
have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated automati-