Executing Color Calibration - Canon imagePROGRAF iPF6400 User Manual

Executing Color Calibration (Windows)

Executing Color Calibration

Executing Color Calibration

The procedure for executing color calibration is as follows.
Getting the Printer Ready
1
You can confirm whether the paper to be loaded can be used in color calibration.
(See "Paper that can be used in Color Calibration.")
2
Load the paper.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
•
Note
3
If a spectrophotometer unit is mounted, select the White/Black Backing Plate color.
We recommend white.
•
Note
Executing Color Calibration
1
Open the Calibration sheet.
782
→P.534
If Adj. Quality has not been executed even once on the paper you are using when you execute Auto Adjust (High
Precision), execute Adj. Quality in the control panel menu.
(See "Automatic Banding Adjustment.")
For the color of the White/Black Backing Plate, continue using the selected color without changing each time you
execute color calibration.
→P.760
→P.531
→P.554
→P.738
iPF6400
User's Guide