Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Neatly - Canon imagePROGRAF iPF6400 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6400:
Table of Contents

Advertisement

iPF6400
If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
If paper is jammed in the back of the printer
Remove the jammed paper from the back of the print-
er.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
3
Press the OK button.

Roll paper cannot be inserted into the paper feed slot

Roll paper cannot be inserted into the paper feed slot
The roll paper is warped.
Paper is jammed by the paper feed slot.
After a roll was advanced, the paper was manually pulled out by force, closing the
Paper Feed Slot.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.

Paper is not cut neatly

Paper is not cut neatly
Cause
The paper is bent or curled at the cut position.
User's Guide
Cause
Corrective Action
Press the Load button and select the paper source.
Straighten out any curling by the edges of the paper.
Roll paper cannot be inserted into the paper feed slot
Corrective Action
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
Remove the roll and open the paper feed slot.
(See "Removing the Roll from the Printer.")
Corrective Action
→P.881
→P.884
→P.538
887

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents