Preparing to Transfer the Printer
Close all ink tank lock levers, and then close the Ink Tank
At this point, ink is drawn out from inside the tubes.
When the process is finished, "Completed! Turn Power
Off!!" is displayed.
Press the Power button and turn off the printer.
Pack the printer
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
Disconnect the power cord and interface cable.
Open the Top Cover.
Do not remove the Maintenance Cartridge unless a replacement message appears.
Removing the Maintenance Cartridge while the ink is bring drawn in may cause the ink to leak out.
Unplug the power cord once the power is turned off. Unplugging the printer before it is off and moving it may cause
damage. If you accidentally unplug the printer before turning it off, plug it in again, reinstall the ink tank, and perform
the procedure again.