Removing The Roll From The Printer - Canon imagePROGRAF iPF6400 User Manual

Removing the Roll from the Printer

1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
•
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Size, and then press the OK button.
4
Press ▲ or ▼ to select Roll Length, and then press the OK button.
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the ◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Removing the Roll from the Printer

Removing the Roll from the Printer
Remove rolls from the printer as follows.
•
Once a roll has been advanced, do not pull the paper out by force. This will prevent further feeding, and the printer will be
unable to keep track of the amount of roll paper left.
Important
If you accidentally pull out paper, follow these steps to remove the roll, and open the paper feed slot.
•
If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
Note
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the
•
Note
2
Press the OK button.
538
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
).
If the Tab Selection screen is not displayed, press the Menu button.
(Paper tab) .
If the Tab Selection screen is not displayed, press the Menu button.
→P.544
iPF6400
User's Guide