Adjusting Line Length - Canon imagePROGRAF iPF6400 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6400:
Table of Contents

Advertisement

Adjusting Line Length

3
Press ▲ or ▼ to select Adj. Fine Feed, and then press the OK button.
4
Press ▲ or ▼ to select a setting value in the range -5 to 5, and then press the OK button.
At this time, if banding in dark colors appears, select a setting value in the range 1 to 5, and if banding in light
colors appears, select a setting value in the range -1 to -5.
Adjusting Line Length
Adjusting Line Length
To ensure that lines in CAD drawings are printed at exactly the right length, use Adjust Length to adjust the amount
that paper is advanced.
There are two options in Adjust Length : AdjustmentPrint and Change Settings.
AdjustmentPrint
After a test pattern is printed, you will measure the discrepancy based on the results of printing.
Change Settings
No test pattern is printed. Instead, you will measure a document already printed to determine the discrepancy.
Additionally, two modes are available in both AdjustmentPrint and Change Settings : A:High or B:Standard/Draft.
Choose the mode that suits your particular printing application.
A:High
This setting is applied when Highest quality or High is selected in Print Quality in the printer driver.
B:Standard/Draft
This setting is applied when Standard or Fast is selected in Print Quality in the printer driver.
We recommend executing the adjustment if you have changed the paper type or paper size.
Note
Always check the Adj. Priority values before using Adjust Length. (See "Selecting a Feed Amount Adjustment Method.")
→P.737
Paper to Prepare
When Using Rolls
When Using Sheets
Perform adjustment as follows.
1
Load the paper.
Loading Rolls on the Roll Holder
Loading Rolls in the Printer
Loading Sheets in the Feed Slot
Important
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
742
An unused roll at least 254.0 mm (10.00 in) wide
High-precision ruler
One sheet of unused paper of at least A4/Letter size
High-precision ruler
→P.534
→P.554
Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be completed correctly
unless the loaded paper matches the settings.
).
→P.531
iPF6400
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents