Canon imagePROGRAF iPF6400 User Manual page 654

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6400:
Table of Contents

Advertisement

Menu Settings
Interface
TCP/IP
Setup
NetWare
AppleTalk
Ethernet
Driver
Interface Print
Return Defaults
System
Sleep Timer
Setup
Shut Down Timer
Buzzer
Contrast Adj.
Date &
654
Time
Date Format
Setting Item
IPv4
DNS Set-
Pri. DNS SrvAddr
tings
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS Set-
DNS
tings
Dync up-
date
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
NetWare
Frame Type
Print Service
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Date
Time
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull
Specify whether DNS server registration is updated automati-
Addr
cally.
Stateless
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes, choose
Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
Specify the communication method. To apply your changes,
choose Register Setting.
Choose On for automatic configuration of the LAN communica-
tion protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported over the
LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the default
values.
Specify the period before the printer enters sleep mode.
Sets the time until the printer turns off automatically. If no oper-
ations are performed on the printer for the duration of the time
set in Shut Down Timer after entering Sleep mode, the printer
automatically turns off.
Choose On for the buzzer to sound once for warnings and
three times for errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting is speci-
fied.
Specify the date format.
Description, Instructions
iPF6400
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents