Canon imagePROGRAF iPF6400 User Manual page 451

iPF6400
• Media Type
This allows you to select the media type.
•
Always select media type that is actually set in the printer. When the media you chose is different from the media set in
the printer, you may not receive the desired print results.
Note
• Paper Source
You can select the paper source.
The following settings are available for paper source.
Setting
Manual
Manual (3mm margins)
Roll Paper
•
When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become defective
depending on the paper used. If this happens, select another paper source.
Note
• Roll Paper Width
This selects the width of the roll media set to the printer.
•
Available only if rolls are selected in Paper Source.
Note
• Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
Setting
Printer Default
None
Print Cut Guideline
•
Available only if rolls are selected in Paper Source.
Note
• Copies
You can input the number of print copies in numerical characters.
•
The maximum value is 999.
•
You can change the numbers by clicking either ▲ button or ▼ button.
Note
User's Guide
Select for manual paper feed printing.
Select for manual paper feed printing when you want to minimize the margin at the far end edge
of paper.
Select to print on roll paper.
The value set on the printer operation panel takes priority.
Each page is not cut after it is printed and printing continues without interruption.
A print cut guideline is printed after each page and printing continues without interruption.
Paper Settings Panel (Mac OS X)
Details
Details
451