Canon imagePROGRAF iPF6400 User Manual page 652

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6400:
Table of Contents

Advertisement

Menu Settings
Adjust
Head
Printer
Posi.
Adj.
Feed Pri-
ority
Adj Far Ed Feed
Calibra-
tion
652
Setting Item
Other
Manual
Adj. Pri-
Automatic
ority
Print Quality
Print Length
Adj.
Auto(GenuinePpr)
Quality
Auto(OtherPaper)
Manual
Adjust
Adjust-
A:High
Length
ment-
B:Standard/Draft
Print
Change
A:High
Settings
B:Standard/Draft
Auto Adjust
Calibration Log
Description, Instructions
Input the setting values from the adjustment pattern printing re-
sults and adjust the printing position to fix misaligned printing.
Normally, select Standard. However, when printing on special
paper, or if printing is not improved after Standard, try Manual.
(See "Manual Adjustment to Straighten Lines and Colors.")
→P.732
Specify exact paper feeding, if desired. Normally, select Auto-
matic. Choose Print Quality for attractive printing. Choosing
Print Quality also makes banding less noticeable. Choose
Print Length if you prefer to feed the paper an exact amount.
However, note that slight banding may occur in the direction of
carriage scanning when Print Length is selected.
Specify this mode with paper identified in the Paper Reference
Guide.(See Paper Reference Guide .)
The printer prints and reads a test pattern for automatic adjust-
ment of the feed amount. (See "Automatic Banding Adjust-
ment.")
→P.738
Specify this mode with paper not in the Paper Reference
Guide.(See Paper Reference Guide .)
The printer prints and reads a test pattern for automatic adjust-
ment of the feed amount. Note that this function takes more
time and consumes more ink than Auto(GenuinePpr). (See
"Automatic Banding Adjustment.")
Use this mode with highly transparent media or other paper for
which Auto(GenuinePpr) or Auto(OtherPaper) cannot be
used.
Print a test pattern for adjustment of the feed amount based on
the type of paper. (See "Manual Banding Adjustment.")
→P.739
Print a test pattern for particular types of paper to compensate
for paper stretching or shrinkage, after which you enter the
amount of adjustment. (See "Adjusting Line Length.")
→P.742
Displayed when you have selected Feed Priority > Adj. Prior-
ity > Print Length.
Adjustment relative to the amount of stretching or shrinkage of
the current paper.
Enter either the adjustment results from AdjustmentPrint or
the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount by
choosing a higher adjustment value. For paper that tends to
shrink, decrease the feed amount by choosing a lower adjust-
ment value. (See "Adjusting Line Length.")
Choose Yes to adjust the feed amount for the trailing edge.
Execute color calibration.
A test pattern for color calibration is printed and the adjustment
values are set automatically.
(See "Color Calibration Using the Printer Sensor.")
The Date, Paper Type, and Adjustment Type for which color
calibration was executed are displayed on the Display Screen
where you can confirm them.
Common calibration and unique calibration are the Adjust-
ment Type of color calibration.
iPF6400
→P.738
→P.742
→P.758
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents