Canon imagePROGRAF iPF6400 User Manual page 87

iPF6400
1
B
This sets the Format for and
• The configuration method varies depending on the OS and
application software you are using.
Note
If Page Setup is displayed in the application menu, the set-
tings are configured by opening the Page Attributes dialog
box from Page Setup.
If it is not displayed, the settings are configured in the up-
per part of the printer driver displayed when you select
Print from the application software menu.
2
Select the printer in the
3
F
In Paper Size, click the size of the original. In this case, click ISO A4 - Oversize.
4
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
5
Access the Main pane.
6
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
7
Make your selection in the
8
Make your selection in the
User's Guide
C
Paper Size.
A
Printer list.
E
Print Target list.
F
Print Quality list.
Printing at Full Size (Mac OS X)
F
OK to close the dialog box, and
87