Roll Holder Set; Removing The Roll Feed Unit - Canon imagePROGRAF iPF6400 User Manual

iPF6400

Roll Holder Set

Roll Holder Set

Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-25 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core. For borderless
printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
• Roll Holder Set RH2-25
• Roll Holder (for 2- and 3-inch paper cores)
• Attachments
Using Rolls with a 2-inch Paper Core
Holder Stopper (for 2-inch paper cores)
•
Borderless Printing on A1 or A2 Rolls
Spacer for Borderless Printing

Removing the Roll Feed Unit

Removing the Roll Feed Unit

•
Always turn off the printer before removing the Roll Feed Unit. The printer may be damaged if you do not turn it off first.
Important
1
Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.")
User's Guide
→P.531
Using Rolls with a 3-inch Paper Core
Holder Stopper (for 3-inch paper cores) 3-Inch Paper Core Attachment
→P.538
Roll Holder Set
551