Color Settings Sheet (Color) - Canon imagePROGRAF iPF6400 User Manual

iPF6400
Setting
Manual (3mm margins)
Roll Paper
•
When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become defective
depending on the paper used. If this happens, select another media source.
Note
• Roll Paper Options button
Click this button to open the Roll Paper Options dialog box, where you can set roll paper width and perform auto
cut settings.
For more information about the roll paper options, see "Roll Paper Options Dialog Box."
• Size Options
Click the Size Options button to open the Size Options dialog box and you can select a media name, size and
other settings.
For more information about the size options, see "Size Options Dialog Box."
• Defaults button
Click the button to return all of the settings on the Page Setup sheet to their defaults.

Color Settings Sheet (Color)

Color Settings Sheet (Color)

You can use this sheet to adjust image Color, Brightness, Contrast, Saturation, and you can set the color balance of
print product more to your liking.
•
You can check a preview of the adjusted state for the following items.
Cyan / Magenta / Yellow, Gray Tone, Brightness, Contrast, and Saturation
Note
• Cyan / Magenta / Yellow
You can adjust the strength or weakness of a color by either inputting a numerical value or dragging the slide bar.
• Gray Tone
You can adjust gray tone from cool black (cool tones) to warm black (red tones) by either inputting a numerical
value or dragging the slide bar.
User's Guide
Select for manual paper feed printing when you want to minimize the margin at the far end edge
of paper.
Select to print on roll paper.
Color Settings Sheet (Color)
Details
→P.278
→P.278
267