The menu structure is shown categorized by tab. The * on the right side of an item indicates the default value.
The printer menu is classified into regular menu items available when no print job is in progress and menu during print-
ing items only available while printing is in progress. see "Printer Menu Operations."
*1: Only displayed in the menu during printing. Not displayed in the regular menu.
For instructions on menu operations, see "Menu Operations."
For details on menu items, see "Menu Settings."
The Paper Menu is not displayed during printing.
Chg. Paper Type ( *1 )
Chg. Paper Size
The same Ink Menu as normal is displayed.
The same Job Menu as normal is displayed.
A limited Set./Adj. Menu containing the following items is displayed.
Adj. Fine Feed ( *1 )
Roll Paper ┋ Manual Paper
(The paper type is displayed here.) ( *1 )
(The size of paper is displayed here.) ( *2 )
Roll Length ( *3 )
(Set the length)
Off *┋ On
(The paper type is dis-
played here.) ( *1 )
Skew Check Lv.
Cutting Mode ( *5 )
Trim Edge First
Scan Wait Time
NearEnd Sht Mrgn
Menu during printing
(Set the length and width)
Automatic *┋ Highest ┋ High ┋ Standard ┋ Low ┋
Lowest ┋ Super Low
High Accuracy ┋ Standard *┋ Loose ┋ Off
Automatic ┋ Eject ┋ Manual
Fast ┋ Standard ┋ Slow
Automatic ┋ Off ┋ On (Preset Len) ┋ On(Input
Length) ┋ Manual
Off ┋ On
Automatic *┋ Strongest ┋ Strong ┋ Standard ┋
Weak ┋ Weakest
Area ( *4 )
Off ┋ 30 sec. ┋ 1 min. ┋ 3 min. ┋ 5 min. ┋ 10
min. ┋ 30 min. ┋ 60 min.
3mm ┋ 20mm
3mm ┋ 20mm
Standard *┋ Little
Front ┋ Top
Off *┋ 1 sec. ┋ 3 sec.
┋ 5 sec. ┋ 7 sec. ┋ 9
Entire area *┋ Leading