Configure The Network Settings Manually - Oce ColorWave 600 User Manual

Configure the network settings manually

Configure the network settings manually
Introduction
If you want configure the network settings manually, please contact your network
administrator to get information about the network infrastructure and parameters.
How to configure the network settings manually
[19]
Step Action
1 If you want enter the network settings manually, use
the 'Scroll wheel' to select 'Manual'. Confirm your
entry with the 'Confirmation key' above the 'Scroll
wheel'.
Use the 'Upper right softkey' to go to the next step.
2 The printer operator panel displays the following
message.
'You can now change network settings for:'
'Hostname'
'Suffix'
Press the 'Lower right softkey' to select the
'Advanced' tab.
3 Use the 'Scroll wheel' to select your network speed.
■
■
■
■
■
■
Confirm your entry with the 'Confirmation key'
above the 'Scroll wheel'
Use the 'Upper right softkey' to go to the next step.
54 Chapter 3 Prepare the printing system for use and get started
'Auto negotiation'
'10 MBit FD'
'10 MBit HD'
'100 MBit FD'
'100 MBit HD'
'1000 MBit FD'
Remarks
[56]
[57]
[58]