Drive Shaft (4X4) Diagnosis And Testing; Clunking Noise During Acceleration; Shudder Or Vibration During Acceleration; Vibration At High Speeds - Chery Tiggo 2009 Service Manual

DIAGNOSIS & TESTING
Vehicle Inspection
Inspect the drive shaft for the following:
• Check the drive shaft for loose bearings.
• Check the drive shaft for any damage or excessive runout.

Shudder Or Vibration During Acceleration

This problem could be a result of:
• A worn or damaged drive shaft joint.
• Improper wheel alignment.

Clunking Noise During Acceleration

This noise may be a result of one of the following conditions:
• A worn drive shaft assembly.
• A loose drive shaft assembly.
• A damaged or worn drive shaft joint.
Shudder Or Vibration During Acceleration
This problem could be a result of:
• A worn or damaged drive shaft joint.
• Improper wheel alignment.

Vibration At High Speeds

This problem could be a result of:
• Foreign material (mud, etc.) packed on the backside of the wheel(s).
• Out of balance tires or wheels.
• Improper tire or wheel runout.
26
09–
Chery Automobile Co., Ltd.