Key Hole Lamp Removal & Installation - Chery Tiggo 2009 Service Manual

2. Remove the lamp mounting screws (1).
3. Remove the courtesy/dome lamp.
NOTE :
The rear courtesy/dome lamp is similar to the middle courtesy/dome lamp.
4. Installation is in the reverse order of removal.
Key Hole Lamp
Removal & Installation
1. Disconnect the negative battery cable.
2. Turn the ignition switch off.
3. Remove the steering column shroud retaining
screws (1).
4. Disconnect the key hole lamp electrical connector.
5. Remove the key hole lamp.
6. Installation is in the reverse order of removal.
92
15–
INTERIOR LAMPS
Chery Automobile Co., Ltd.
LTSM150044
LTSM110031