Input Shaft Inspection - Chery Tiggo 2009 Service Manual

Inspection
1. Input Shaft
• Inspect the external surface of the input shaft
and needle bearings (1) for any damage or
excessive wear.
• Inspect the input shaft spline for any damage
or excessive wear.
2. Needle Bearing
Inspect the input shaft and gears for smooth operation.
3. Synchronizer Ring
• Inspect the synchronizer rings for any damage
or signs of breakage in the surface of synchro-
nizer rings.
• Press synchronizer ring (1) 3rd-4th gear (2),
and then examine the clearance "A". If the "A"
is less than the limit value, the synchronizer
ring and 3rd-4th gear should be replaced.(Limit
Value: 0.5 mm)
Chery Automobile Co., Ltd.
MANUAL TRANSAXLE UNIT REPAIR
1 - Synchronizer Ring
2 - Gear
LTSM080056
08
LTSM080057
LTSM080058
285
08–