Chery Tiggo 2009 Service Manual page 1482

Installation Notes:
• Perform the following to measure and adjust parking brake shoes:
1. Using a brake measuring gauge or equivalent, measure the inside diameter of parking brake drum (1).
2. Place the brake measuring gauge over the
parking brake shoes at their widest point.
3. Using the adjuster wheel, adjust the parking brake shoes until the linings on both parking brake shoes just
touch the jaws on the brake measuring gauge.
• After installation, adjust the parking brake cable as
necessary (See Parking Brake Adjustment in Sec-
tion 12 Brakes).
BRAKE SHOES
Rear Shoes
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
NEW THICKNESS
2.5 mm
BESM120024
LTSM120039
MINIMUM THICKNESS
1.5 mm
12–
12
87