Chery Tiggo 2009 Service Manual page 1742

NOTE :
• The levelness from point A to B should be evenly changed from 0 to 1, and the levelness from point C to B should
be evenly changed from 1 to 0.
• The clearance from point F to C should be evenly changed from 6 to 7, and the levelness from point G to H
should be evenly changed from 1 to 0.
• The levelness from point K to J should be evenly changed from 0 to 1.
• The tolerance of clearance between front and back doors at MN, NP sections should be within 1.2 mm.
Cross section B1-B1, requirements for clearance and
levelness.
Cross section B2-B2, requirements for clearance and
levelness.
158
15–
BODY DIMENSIONS
1 - Front Rear Door
1 - Fender
Chery Automobile Co., Ltd.
2 - Side Wall
LTSM150012
2 - Side Wall
LTSM150013