Chery Tiggo 2009 Service Manual page 1215

8. Remove the 10 rear transaxle bearing end-plate
bolts (1), and then remove the bearing cap.
(Tighten: Rear transaxle bearing end-plate bolts to
6.9 N·m)
9. Remove shaft clip (3) and shaft clip (1) from the
shafts, and then remove bearing collar (2).
10. Remove the transaxle to clutch housing bolts (1),
and then use a pry bar to remove the transaxle
housing.
(Tighten: Transaxle to clutch housing bolts to
44 N·m)
11. Perform the following steps to remove the transaxle
housing (1).
272
08–
MANUAL TRANSAXLE UNIT REPAIR
Chery Automobile Co., Ltd.
LTSM080124
LTSM080125
LTSM080126
LTSM080022