Removal & Installation
WARNING!
The normal operating temperature of the exhaust system is very high. Therefore, never work around or attempt
to service any part of the exhaust system until it has cooled. Special care should be taken when working near
the catalytic converter. The temperature of the converter rises to a high level after a short period of engine oper-
ating time.
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove the catalytic converter mounting nuts (1)
and gaskets.
(Tighten: Catalytic converter mounting nuts to 50
N·m)
4. Remove the catalytic converter.
5. Clean the ends of the pipes to ensure proper mat-
ing of all parts. Discard broken or worn isolators,
rusted or overused clamps, supports, and attaching
parts.
6. Installation is in the reverse order of removal.
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
07
LTSM070001
7
07–