2.
CHECK RIGHT FRONT WHEEL SPEED SENSOR ELECTRICAL CONNECTOR
• Turn ignition switch off.
• Disconnect the wheel speed sensor (1) electrical
connector.
• Inspect the wheel speed sensor electrical connector
for damage.
Is the electrical connector OK?
Yes
>>
Go to the next step.
No
>>
Repair or replace the electrical connector
as necessary.
3.
CHECK RIGHT FRONT WHEEL SPEED SENSOR REFERENCE SIGNAL CIRCUIT
• Turn ignition switch on.
• Measure the sensor reference voltage between ter-
minal 2 of the wheel speed sensor connector, ter-
minal side and ground.
• Voltage should exist (2.0 - 4.0 V).
Is the proper voltage present?
Yes
>>
Go to the next step.
No
>>
Repair or replace the circuit for an open,
short to ground or short to battery in connector or
harness.
4.
CHECK RIGHT FRONT WHEEL SPEED SENSOR RESISTANCE
• Check the wheel speed sensor resistance between
the sensor terminals 1 and 2, component side.
Is the sensor resistance 700 - 1500 ohms?
Yes
>>
Go to the next step.
No
>>
Replace the Right Front wheel speed
sensor.
62
12–
DIAGNOSIS & TESTING
PZSMD120001
Chery Automobile Co., Ltd.
LTSMD120003
VISMD120005