Operations In The Phase Of Test-Drive; Before Entering The Car; Before Driving - Chery QQ3 User Manual

Operations in the phase of
test-drive
Some simple protective measures should be
followed during the initial running-in period
drivability and
which can improve
economy of the vehicle
and prolong its
service life.

Do not run engine in high speed at
idle;

Do not overload engine
while us ing
transmission drive;

Avoid using emergency
unless there is an emergency;

Avoid stepping down accelerator at
neutral during start;

The engine requires a period of
time for warming-up after start

Avoid drawing other cars;

Avoid any rigor operations such as
emergent start, sudden acceleration
and long-time high speed running
which will not only do harm to the
engine, but also increase fuel and
oil consumption and even damage
engine components. And especially
try to
accelerator pedal to the end under
bottom gear.

Before entering the car


Inspect
rearview mirror and lamps is clean
possibly
or damaged;

Inspect if tire pressure is normal;

brake
Inspect
normal;

Watch if there is any obstacles
behind the car;

Inspect

Inspect
other fluid level are within
standard range.

Before driving


M ake sure that you have known the
condition and equipments of the
avoid stepping down
if windows, outside
if all vehicle lights are
if fuel pipes leak
if engine oil level and
Notices Before Drive
vehicle, and how to operate
safely.

Adjust the position of the seat;

interior and
Adjust the angle of
outside mirrors on the car.

that
Insure all passengers have tied
up their
seat belt.

When turning the ignition switch to
position II, you should inspect
whether the alarm lights have
out after automatic detection.
！Notice
Please inspect if windows,
rear windshield,
lamps,
transmission system and
warning indicator are
normal. Do not
anything on rear luggage
them
gone
all
signal
put
10