Rear Trailing Arm Assembly Removal & Installation - Chery Tiggo 2009 Service Manual

Rear Trailing Arm Assembly
Removal & Installation
1. Raise and support the vehicle.
2. Remove the wheel mounting nuts and the wheel assembly.
(Tighten: Wheel mounting nuts to 110 N·m)
3. Use a jack to support the rear trailing arm.
4. Remove the connecting bolts (1) that joins the rear
trailing arm and the shock absorber bracket.
(Tighten: Rear trailing arm to shock absorber
bracket bolts to 80 - 100 N·m)
5. Lower the jack and remove the rear spring.
6. Remove the connecting bolt that joins the rear trailing arm to the upper control arm (See Rear Upper Control
Arm Removal & installation in Section 10 Suspension).
7. Remove the connecting bolt that joins the rear trailing arm to the lower control arm (See Rear Lower Control Arm
Removal & installation in Section 10 Suspension).
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
10
LTSM100060
35
10–