Chery Tiggo 2009 Service Manual page 977

Diagnostic Procedure
1.
CHECK A/T SOLENOID SIGNAL
• With the scan tool, select view DTC and data stream for A/T.
• Start the engine.
• Monitor the gear position while driving, and compare to the following table.
SHIFT
SELECT
RANGE
SOLENOID
POSITION
VALVE 1
P 0
R R
N 0
1
2
D
3
4
• #: Operating component
Is the check result normal?
Yes >>
The condition that caused this DTC is intermittent (See Diagnostic Help in Section 08 Transaxle &
Transfer Case).
No >>
Go to the next step.
2.
ACTUATE TEST
• Stop the engine.
• Turn ignition switch on.
• With X-431 scan tool, perform the solenoid actuate test.
• The solenoid actuation should be heard.
Is the check result normal?
Yes >>
Go to step 5.
No >>
Go to the next step.
34
08–
DIAGNOSIS & TESTING
TRANSAXLE GEAR POSITION/SOLENOID ACTIVATION
SHIFT SHIFT
SOLENOID SOLENOID
VALVE 2 VALVE 3
- - #
- - -
- - #
- - #
- # -
- - -
# # -
SHIFT
SOLENOID
VALVE 4
-
-
-
#
#
-
-
Chery Automobile Co., Ltd.