Chery Tiggo 2009 Service Manual page 1321

15. Remove the bolts (1) and nut (2) between the sub-
frame assembly and side member assembly.
(Tighten: Sub-frame assembly retaining bolts to
120 ± 5 N·m)
16. Remove the bolts between the radiator lower seat and side member assembly, then remove the side member
assembly.
17. Remove the front engine mount and rear engine mount (See Engine Mounts Removal & Installation in Section
02 Engine).
18. Remove the bolts (1) between the sub-frame
assembly and the vehicle body.
(Tighten: Sub-frame assembly to vehicle body bolts
to 180 ± 15 N·m)
19. Remove the sub-frame assembly.
20. Separate the front lower control arm and the front stabilizer bar from the sub-frame assembly.
21. Installation is in the reverse order of removal.
20
10–
ON-VEHICLE SERVICE
Chery Automobile Co., Ltd.
LTSM100056
LTSM100044