Heated Seat Switch Removal & Installation; Heated Seat Element Removal & Installation - Chery Tiggo 2009 Service Manual

Heated Seat Switch
Removal & Installation
1. Using a trim stick, carefully remove the switches (1) from the mounting bezel.
2. Disconnect the heated seat switch electrical connector.
3. Installation is in the reverse order of removal.
Heated Seat Element
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the appropriate seat cushion.
3. Disconnect the inoperative heated seat cushion electrical connector.
4. Remove the inoperative heating element from the seat.
5. Installation is in the reverse order of removal.
Chery Automobile Co., Ltd.
SEATS
LTSM150127
15
109
15–