Chery Tiggo 2009 Service Manual page 1257

7. Install the lock pin (2).
8. Install the lock pin in the position shown in the fig-
ure.
CAUTION:
After the lock pin is taped in, the axle shaft
gear and the planetary gear should operate
normally.
9. Using special tools MD-998812 (1) and MB-998819
(2), install the differential front/rear bearing (3).
10. Install the driven gear of main reducing gear.
11. Apply thread sealant to the threads of all bolts.
314
08–
DIFFERENTIAL UNIT REPAIR
1 - Differential Housing
2 - Lock Pin
3 - Pinion Shaft
Chery Automobile Co., Ltd.
LTSM080114
LTSM080115
LTSM080116