Rear Camber Adjustment - Chery Tiggo 2009 Service Manual

Rear Camber Adjustment

1. While holding the cam bolt stationary, loosen the
upper control arm bolt (1).
(Tighten: Upper control arm bolt to 80 - 100 N·m)
2. Rotate the cam bolt head left or right until the rear
wheel camber for that rear wheel is set to the pre-
ferred specification.
3. While holding the cam bolt head stationary, tighten
the upper control arm bolt to the specified torque.
46
10–
ON-VEHICLE SERVICE
Chery Automobile Co., Ltd.
BESM100031