Cylinder Head Unit Repair (2.4L); Cylinder Head Specifications (2.4L); Cylinder Head Disassembly (2.4L) - Chery Tiggo 2009 Service Manual

Cylinder Head
Specifications
Torque Specifications
DESCRIPTION
Cylinder Head Bolts
Cylinder Head Cover Bolts
Clearance Specifications
DESCRIPTION
Cylinder Head Flatness
Intake Valve Deflection
Exhaust Valve Deflection
Spring Height
Disassembly
NOTE :
The following special tools are required to perform the repair procedure:
• MD-998772 - Valve Spring Compressor
• MD-998774 - Valve Oil Seal Installer
NOTE :
Replacement cylinder head comes complete with valves, seals, springs, retainers, keepers, tappets, and camshafts.
1. Remove camshaft.
2. Using the special tool MD-998772 (1), compress
the valve spring.
3. Remove the valve keeper, valve spring retainer
and valve spring.
4. Push the valve stem from the cylinder head and
remove the valve.
Chery Automobile Co., Ltd.
CYLINDER HEAD UNIT REPAIR
TORQUE (N·m)
1st Step: Tighten the bolt to 78 N·m
2nd Step: Completely loosen the bolt
3rd Step: Retighten the bolt to 20 N·m
4th Step: Tighten the bolt an additional 90°
5th Step: Finish tightening the bolt an additional 90°
11 N·m
SPECIFICATION (mm)
0.03
0.02
0.04
51
02
LTSM020092
241
02–