Steering Gear - General Information; Steering Gear Specifications; Steering Gear Special Tool - Chery Tiggo 2009 Service Manual

Description
The steering gear used is the rack-and-pinion type with power assist. It is mounted on the front suspension sub-
frame. The outer ends of the outer tie rods attach to the front knuckles.
NOTE :
The power steering gear should not be serviced or adjusted. If a malfunction or steering fluid leak occurs with the
steering gear, the complete steering gear needs to be replaced.
Operation
The steering wheel turns the pinion. The rack is a long flat bar with geared teeth on one side. The rack teeth mesh
with the teeth on the pinion gear. Rotation of the pinion moves the rack from left to right and right to left. The tie rod
then causes the wheels to turn to the left or right.
Specifications
Torque Specifications
DESCRIPTION
Inlet / Outlet Pipe Nut
Intermediate Shaft Bolt
Steering Gear to Sub-Frame Bolts
Sub-Frame Assembly Bolts
Tie Rod End Nut
Tie Rod Jam Nut
Wheel Mounting Nuts
Special Tool
Ball Joint Separator
CH-10002
Chery Automobile Co., Ltd.
GENERAL INFORMATION
TORQUE (N·m)
25 - 30
25 - 30
70 - 80
180 ± 15
32 - 38
15
110
11
19
11–