Chery Tiggo 2009 Service Manual page 1185

17. Remove both front axle shafts (See Front Axle Shaft Removal & Installation in Section 09 Driveline & Axle).
18. Remove the engine undercover and splash shields.
19. Remove the engine to transaxle lower bolts.
(Tighten: Engine to transaxle lower bolts to 80 N·m)
20. Remove the bolts that mount the side sill to vehicle body.
(Tighten: Side sill to vehicle body bolts to 120 N·m)
21. Remove the front engine mount bolts (1).
(Tighten: Front mount bolts to 60 N·m)
22. Remove the rear engine mount bolts (2) and the
rear engine mount bracket bolts (1).
(Tighten: Rear mount bolts to 40 N·m)
23. Remove the sub-frame assembly (See Sub-Frame Assembly Removal & Installation in Section 10 Suspension).
24. Remove the engine to transaxle lower bolts.
(Tighten: Transaxle mount bolts to 40 N·m)
25. Separate the transaxle from the engine and remove the transaxle from the vehicle.
WARNING!
Use a suitable jack to support the transaxle during removal.
26. Installation is in the reverse order of removal.
242
08–
ON-VEHICLE SERVICE
Chery Automobile Co., Ltd.
BESM080035
LTSM020188