Check A/T Assembly Electrical Connector - Chery Tiggo 2009 Service Manual

3.

CHECK A/T ASSEMBLY ELECTRICAL CONNECTOR

• Turn ignition switch off.
• Disconnect the A/T assembly electrical connector
E-037 (1).
• Inspect the electrical connector for damage.
Is the electrical connector OK?
Yes >>
Go to the next step.
No >>
Repair or replace the electrical connector
as necessary.
4.
CHECK SOLENOID POWER SUPPLY
• Turn ignition switch on.
• Check the solenoid power circuit for battery voltage
between the A/T connector E-037 terminal B3 and
ground.
Is battery voltage present?
Yes >>
Go to the next step.
No >>
Repair or replace circuit for an open in
harness or connectors.
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
LTSMD080023
08
LTSMD080026
35
08–