Drive Belt - Chery SQR480ED User Manual

Maintenance and Upkeep
The engine will work unsteadily and
the components wll even be damaged
if the spark plugs are installed not
properly or spark plugs of any other
else brands are installed. In order to
avoid engine and other components
being damaged, the following tips
should be observed: 1. Tighten the
spark plugs according to standard
torque, do not let it too tight, it will
damage the cylinder head thread if
you let it too tight. 2. While
removing or tightening the spark
plugs, make the sockets aligned with
the spark plugs rightly. 3. Install the
plugs in the engine and run them by
hand at first. 4. Loosen the plugs
through pulling them, instead of
using high-tension line. 5. Do not use
spark plugs of any other else brands.
6. Do not pollute the spark plug hole.
7. Pay attention to the safety, while
the engine is hot, the spark plugs are
hot, but you want to remove the
plugs.

Drive belt

Correct installation and
- 124 -
tension of drive belt can ensure
normal working of
conditioning and other performance.
Please replace the drive belt as soon
as possible, if it is worn, cracked or
inflated.
In order to check tension of drive belt,
press the middle of pulley properly
with your thumb to see whether or
not the displacement of belt is about
10mm. If the belt is too loose, please
have it adjusted and repaired by the
nearest Chery Authorized Service
Station.
！Notice
Be sure not to start the engine while
checking the belt, otherwise it will
suitable
cause moving
separated or twisted together. It may
engine, air
parts squeezed,