Chery Tiggo 2009 Service Manual page 1382

11. On each side of the steering gear, remove the nut
(1) attaching the outer tie rod end to the steering
knuckle.
(Tighten: Outer tie rod end nut to 32 - 38 N·m)
12. Using special tool CH-10002, separate the outer tie
rod ends from both steering knuckles.
13. Remove the wheel speed sensor mounting bolt (1).
(Tighten: Wheel speed sensor mounting bolt to
10 ± 1 N·m)
14. Remove the wheel speed sensor and set it aside.
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
LTSM110034
LTSM110027
11
LTSM100045
27
11–