Fuel Injector Inspection - Chery Tiggo 2009 Service Manual

4. Remove the fuel pressure regulator (See Fuel Pressure Regulator Removal & Installation in Section 04 Fuel
Delivery).
5. Remove the two fuel rail mounting bolts.
(Tighten: Fuel rail mounting bolts to 12 N·m)
6. Remove the fuel rail with the four fuel injectors.
7. Remove the clamp holding the fuel injector to the fuel rail.
8. Remove the fuel injector from the fuel rail.
9. Installation is in the reverse order of removal.
Installation Notes:
• Install new seals on the fuel injector sealing surfaces.

Fuel Injector Inspection

1. Remove the fuel injector electrical connector.
2. Use a digital multimeter to measure the resistance between the two fuel injector pins (fuel injector side).
SPECIFICATION
11 - 13
22
04–
ON-VEHICLE SERVICE
TEMPERATURE
20°C
Chery Automobile Co., Ltd.
LTSM040005