Description
The drive shafts for the 4x4 are separated into the front intermediate drive shaft and the rear intermediate drive shaft.
The front intermediate drive shaft is installed between the transfer case and the Interactive Torque Management
(ITM) controller. The rear intermediate drive shaft is installed between the ITM controller and the rear axle.
Operation
The drive shafts transfer the torque from the transaxle to the rear axle.
Specifications
Torque Specifications
DESCRIPTION
Front Intermediate Drive Shaft to ITM Controller Bolts
Rear Intermediate Drive Shaft to ITM Controller Bolts
Rear Intermediate Drive Shaft to Body Bolts
Rear Intermediate Drive Shaft to Rear Axle Flange
Chery Automobile Co., Ltd.
GENERAL INFORMATION
TORQUE (N·m)
70 ± 7
39 ± 3
60 ± 5
65 ± 6
09
25
09–