Table of Contents
Advertisement
Write down the RMX's serial number that is on a sticker on the back of the unit. It will be needed for
product registration later in the process.
Installing the RTM ISDN Card on the RealPresence Collaboration Server
(RMX) 2000
The ISDN card is shipped out of the box and must be manually installed into the rear of the
RMX 2000. This card must be seated opposite an MPM+/MPMx card. It is recommended
that the ISDN card be installed before the RMX 2000 is placed in a rack.
An RMX Software License is included with the ISDN card and must be registered as part of
the Product Registration and Product Activation. For more information, refer to the ISDN
Software Licence document you received with your shipment.
For more information on installing the ISDN card, see "Installing or Replacing the RTM ISDN
Card" on page 1-36.
Telescopic Rail Runner Assembly for RealPresence Collaboration
Server (RMX) 2000
Before installing the telescopic rail runners in the rack, make sure that the kit has the
following parts:
Table 1-5
Part/Kit no.
ASY2716A-L0
Rail runner
Polycom, Inc.
— Rack Installation Accessories. This kit contains the accessories for the 19" rack.
— Optional - ISDN Package. Contains the ISDN card and ISDN Software License.
Make sure that boxes contain all the required parts.
Rail Runners Kit Contents
Item
Left rail runner (two
types available: item (a)
with or (b) without rail
runner clip
Note: The rail runner
clip is designed to
attach and clip onto the
chassis runner frame.
Right rail runner (two
types available: with or
without rail runner clip)
Note: The rail runner
clip is designed to
attach and clip onto the
chassis runner frame.
Chapter 1-Hardware Description
Item
no.
Item Sample
1
(a)
(b)
Note: rail runner end views
2
See Figure 1-1
Item
Quantity
1
1
1-7
Advertisement
Table of Contents
