Installing The Rtm Isdn Card On The Realpresence Collaboration Server; (Rmx) 2000; Telescopic Rail Runner Assembly For Realpresence Collaboration Server - Polycom 2000 Hardware Manual

RealPresence®Collaboration Server (RMX) 2000 Hardware Guide

Installing the RTM ISDN Card on the RealPresence Collaboration Server

(RMX) 2000

The ISDN card is shipped out of the box and must be manually installed into the rear of the RMX 2000. This
card must be seated opposite an MPMx/MPMRx card. It is recommended that the ISDN card be installed
before the RMX 2000 is placed in a rack.
An RMX Software License is included with the ISDN card and must be registered as part of the Product
Registration and Product Activation. For more information, refer to the ISDN Software Licence document
you received with your shipment.
For more information on installing the ISDN card, see

Telescopic Rail Runner Assembly for RealPresence Collaboration Server

(RMX) 2000
Before installing the telescopic rail runners in the rack, make sure that the kit has the following parts:
Rail Runners Kit Contents
Part/Kit no.
ASY2716A-L0
Rail runner
Polycom, Inc.
Item
Rail Runner End Views:
Left rail runner (two types
available: item (a) with or (b)
without rail runner clip
Note: The rail runner clip is
designed to attach and clip
onto the chassis runner
frame.
Right rail runner (two types
available: with or without rail
runner clip)
Note: The rail runner clip is
designed to attach and clip
onto the chassis runner
frame.
Installing or Replacing the RTM ISDN Card
Item Item Sample
no.
1
2 See Figure 1-1.
.
Item
Quantity
1
1
21