Incorrect Date And Time; Drives Reported As "Dead" When Starting System - Fujitsu PRIMERGY TX150 S5 Operating Manual

Troubleshooting and Tips
7.8

Incorrect Date and Time

Ê Set the date and time in the operating system or in the BIOS Setup under the
Main menu, using System Time and System Date respectively.
I
Note that the operating system may affect the system time. For example,
the operating system time may deviate from the system time under Linux,
and would overwrite the system time in the default setting on shutdown.
If the date and time are still wrong after the server has been switched off and
back on again, replace the lithium battery (for a description refer to the D2399
Technical Manual for the system board) or contact our customer service team.
7.9 Drives Reported as "Dead" When Starting
System
RAID controller configuration incorrect
Ê Check and correct the settings for the drives using the RAID controller utility.
Further information is provided in the manual for the RAID controller.
TX150 S5
Operating Manual
Incorrect Date and Time
83