Enter Password - NEC Express5800 1080Xd User Manual

USERS_GUIDE_1080XD_hw
1.4.9.1 Boot
The content of POST (Power On Self-Test) is displayed on the screen at the boot of the
Express server system.
After a pause, the following message is displayed in the left bottom corner of the screen.
Press <F2> to enter Setup
If you press the <F2> key while this message is displayed, SETUP is booted and the main
menu screen is displayed.
If you have already set the password after booting SETUP, you are prompted to enter the
password. Enter the password.

Enter password:[

You can try to enter the password up to three times. If you enter a wrong password for three
times, the Express server is terminated. (You can not operate the server.) Turn off the power
and wait for about ten minutes before turning on the power and reboot the Express server.
]
1-45