Disable Tftp Firmware Upgrade; Disable Port 77Fe (Hex); Disable Web Server; Disable Web Setup - Lantronix xPico User Manual

Disable TFTP Firmware Upgrade

This setting defaults to the N (No) option. The Y (Yes) option disables the use of
TFTP to perform network firmware upgrades. With this option, you can download
firmware upgrades over the serial port using DeviceInstaller's Recover Firmware
procedure. (See

Disable Port 77FE (Hex)

Note: If you choose to disable this option, keep in mind that disabling both Telnet
Setup and Port 77FE will prevent users from accessing the setup menu from the
network.
Port 77FE is a setting that allows DeviceInstaller, Web-Manager, and custom
programs to configure the unit remotely. You may wish to disable this capability for
security purposes.
The default setting is the N (No) option, which enables remote configuration. You can
configure the unit by using DeviceInstaller, web pages, Telnet, or serial configuration.
The Y (Yes) option disables remote configuration and web sites.
Note: The Y (Yes) option disables many of the GUI tools for configuring the unit,
including the embedded Web-Manager tool.

Disable Web Server

This setting defaults to the N (option). The Y (Yes) option disables the web server.

Disable Web Setup

The Y (Yes) option disables configuration using the Web-Manager. This setting
defaults to the N (option).

Disable ECHO Ports

This setting controls whether port 7 echoes characters it receives.
xPico User Guide
10 Firmware Upgrades.)
Disable TFTP Firmware Update (N) : _
Disable Port 77FEh (N) ? _
Disable Web Server (N) ? _
Disable Web Setup (N) ? _
Disable ECHO ports (Y) ? _
8: Setup Mode: Advanced Settings
58