Disable Web Setup; Disable Echo Ports; Enable Enhanced Password; Default Settings (Option 7) - Lantronix UDS2100 User Manual

Disable Web Setup

The Y (Yes) option disables configuration using the Web Manager. This setting
defaults to the N (No) option.

Disable ECHO Ports

This setting controls whether port 7 echoes characters it receives. The default
setting is Y (Yes), which disables ECHO ports.

Enable Enhanced Password

This setting defaults to the N (No) option, which allows you to set a 4-character
password that protects Setup Mode by means of Telnet and web pages. The Y
(Yes) option allows you to set an extended security password of 16-characters
for protecting Telnet and Web Page access.

Default Settings (Option 7)

Select 7 to reset the unit's Channel 1 & 2 configuration and expert settings to the
default settings. The server configuration settings for IP address, gateway IP
address, and netmask remain unchanged. The specific settings that this option
changes are listed below:
Channel 1 & 2 Configuration Defaults
Baudrate
I/F Mode
TCP port number
Connect Mode
Hostlist retry counter
Hostlist retry timeout
Start Character
All other parameters

Expert Settings Defaults

TCP Keepalive time in s
ARP Cache timeout in s
UDS2100 Device Server User Guide
Disable Web Setup (N) ? _
Disable ECHO ports (Y) ? _
Enable Enhanced Password (N) ? _
9: Setup Mode: Advanced Settings
9600
4C (1 stop bit, no parity, 8 bit, RS-232C)
10001 on Channel 1
10002 on Channel 2
C0 (always accept incoming connection; no active
connection startup)
3
250 (msec)
0x0D (CR)
0
45
600
64