Utility mode
2
Touch [3 Administrator Settings].
–
An item can also be selected by pressing the key in the keypad for the number beside the desired
button. For [3 Administrator Setting], press the [3] key in the keypad.
3
Type in the administrator password, and then touch [OK].
–
For details on typing in text, refer to
The Administrator Settings screen appears.
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
Océ cm3522/cm2522
"Entering text" on page
12-2.
11
11-36