Troubleshooting
4.3.2
Clearing jammed staples in the saddle stitcher
!
Detail
For details on clearing misfed paper in the finisher 9356, refer to
9356" on page
For details on clearing misfeed paper in the saddle stitcher, refer to
saddle stitcher" on page 4-48
1
Remove all paper from the finisher.
2
Raise the output tray, and then push down the staple
cartridge holder to remove it.
3
Raise the shutter of the staple cartridge holder, and then
remove one sheet of staples.
4
Return the shutter of the staple cartridge holder to its original position.
5
Insert the staple cartridge holder, and then push it up until
it locks into place.
6
Return the output tray to its original position.
Océ cm3522/cm2522
4-43.
"Clearing a paper misfeed in finisher
"Clearing a paper misfeed in the
4
4-57