Oce cm3522 User Manual page 466

Utility mode
Parameter
Auto Reset
Job Reset
Reminder
Even if the System Auto Reset Time is [OFF], the System Auto Reset function is activated after 1 minute
of no operation of the machine during the User Authentication or Account Track.However, when in the
Enlarge Display mode, the System Auto Reset function is not activated.
If user authentication settings have been specified or "Enhanced Security Mode" has been set to "ON",
the logoff from Administrator mode or user authentication mode will be performed according to the
"System Auto Reset Time" parameter.
User Box Settings
Parameter
Delete Unused User Box
Delete Secure Print Documents
Auto Delete Secure Document
Encrypted PDF Delete Time
Touch & Print Delete Time
Document Hold Setting
External Memory
Function Settings
Stamp Settings
Parameter
Header/Footer Settings
Fax TX Settings
Océ cm3522/cm2522
Description
Select the setting (between 1 minute and 9 min-
utes or "OFF") for the desired length of time until
the automatic panel reset operation is performed
for each mode (Copy and Scan/Fax).
When Account is Select whether or not the settings are reset (initial-
changed ized) when the user has changed.
This machine detects that the user has changed
when the optional key counter has been removed
or when the user has logged off if user authentica-
tion or account track settings are specified.
When original Select whether or not the settings are reset when
is set on ADF an original is loaded into the automatic document
feeder.
Next Job Staple Setting:
Select whether the same Staple setting from the
previous job is set or the setting is canceled when
that job begins and the settings for the next job
can be specified.
Original Set/Bind Direction:
Select whether the same Original Direction and
Binding Position settings from the previous job are
set or the settings are canceled when that job be-
gins and the settings for the next job can be spec-
ified.
Reset Data After Job:
Select whether the same settings for a scan oper-
ation or for a fax transmission from the previous
job are set or the settings are canceled when that
job is completed and the settings for the next job
can be specified. (However, even if "OFF" is se-
lected, the destination is cleared.)
Description
Specify settings for using boxes. For details, refer to the User's Guide [Box
Operations].
Specify settings for using boxes. For details, refer
to the User's Guide [Box Operations].
Save Document
Print Document
Description
Program or delete header/footer settings.
Select whether or not the stamp settings are canceled when
a fax is sent.
11
Default Setting
Copy: 1 Minute
Scan/Fax: 1 Minute
Reset
Do Not Reset
OFF
OFF
ON
Default Setting
1 day
1 day
1 day
ON
OFF
ON
Default Setting
-
Cancel
11-27