Controlling Use Of This Machine With Authentication Unit (Biometric Type) - Oce cm3522 User Manual

Before making copies
5
Touch [Login] or press the [Access] key.
The Basic screen appears.
6
Make copies using the desired copy settings.
7
When you are finished printing, press the [Access] key.
A message appears, requesting confirmation to log off.
8
Touch [Yes], and then touch [OK].
The account track screen appears.
!
Detail
The accounts can be managed in Administrator Settings mode, available from the Utility mode. Settings
should be specified by the administrator.
If "Account Track Input Method" on the General Settings screen of Administrator Settings mode was
set to "Password Only", log on is possible by only entering the password. For details, refer to
Authentication/Account Track" on page
For details on specifying account track settings, refer to
page 11-66.
1.3.12

Controlling use of this machine with authentication unit (biometric type)

A authentication unit (biometric type) can be used with this machine to perform authentication. The
authentication unit (biometric type) authenticates the user by scanning the vein patterns in the finger.
Note
1-to-many authentication: Authentication is performed simply by positioning the finger.
1-to-1 authentication: Authentication is performed by typing in the user name and positioning the finger.
Océ cm3522/cm2522
11-29.
"Selecting an authentication method" on
1
"User
1-35