Oce cm3522 User Manual page 458

Utility mode
Parameter
Default Copy Settings
Default Enlarge Display
Settings
When AMS Direction is In-
correct
Separate Scan Output
Method
Enlargement Rotation
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Océ cm3522/cm2522
Description
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on
(the power switch is set to "n") or the [Reset] key is pressed
can be specified.
• Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
Specify the default copy settings for the Enlarge Display
mode.
This parameter appears if the machine had previously en-
tered the Enlarge Display mode of Copy mode.
• Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
Select whether or not printing continues when the paper
and original orientations are different with the "Auto Paper
Select" setting selected.
• Print:
The Zoom setting is automatically set and the copy is
printed on paper of the specified size in the specified
orientation.
• Delete Job:
The job is deleted, and no copies are printed.
Select whether copies are printed as the original is being
scanned or after the entire original has been scanned when
scanning an original in separate batches or when scanning
a multiple-page document from the original glass.
• Page Print:
Printing of copies that can be printed begins while the
original is being scanned.
• Batch Print
Printing begins after all pages of the original have been
scanned.
Select whether an image that exceeds 11-11/16 inch in the
main scanning direction (left/right direction on the original
glass and ADF) is rotated when the copies are printed.
• Allow:
An enlargement rotation is performed. However, this is
applied only when the "Black" Color setting is selected.
• Restrict:
The enlargement rotation is prohibited, regardless of
the selected Color setting.
Select whether or not the "Auto" Zoom setting is automat-
ically selected when a paper tray is selected (except when
the "Auto" Paper setting is selected) while an original is
placed on the original glass.
Select whether or not the "Auto" Zoom setting is automat-
ically selected when a paper tray is selected (except when
the "Auto" Paper setting is selected) while an original is
loaded into the ADF.
Select which paper tray is selected when the "Auto" Paper
setting is canceled.
• Tray Before APS ON:
The paper tray that was being used before the "Auto"
Paper setting was selected is selected.
• Default Tray:
Tray 1 is used.
Select the default paper tray loaded with paper for the cov-
er pages (front cover), inserted pages and chapter title pag-
es.
11
Default Setting
Factory Default
Factory Default
Print
Page Print
Restrict
OFF
ON
Tray Before APS ON
Tray 2
11-19