Oce cm3522 User Manual page 336

Application functions
? Can any size be specified?
% Any size can be specified from the Custom Size screen. Touch [X] or [Y], touch [<-->] to switch
between the integer and the fraction, and then touch [–] and [+] to specify the size of the document.
If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to
type in the setting. For details on switching between decimal and fraction values, refer to
Settings" on page
If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
7
In the Basic screen, touch [Paper], and then select the paper tray loaded with the paper.
– If settings were specified in the 2/4/8 Repeat screen, touch [Zoom] in the Basic screen, and then
specify the zoom ratio setting.
8
Specify any other desired copy settings.
– To cancel the setting and select the default, press the [Reset] key.
9
Using the keypad, type in the desired number of copies.
10
Press the [Start] key.
Océ cm3522/cm2522
11-15.
7
"System
7-59