Copy paper/originals
Make sure that [X] is selected, touch [↔] to switch between the integer and the fraction, and then
–
touch [–] and [+] to type in the length of side X. (5-1/2 inch to 18 inch)
–
Make sure that [Y] is selected, touch [´] to switch between the integer and the fraction, and then
touch [–] and [+] to type in the length of side Y. (3-9/16 inch to 12-1/4 inch)
–
If a decimal value is displayed in the Custom Size screen, use the keypad to type in the setting. For
details on switching between decimal and fraction values, refer to
page
–
If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
To cancel changes to the settings, touch [Cancel].
6
Touch the memory button where the paper size is to be stored.
–
To change the name of a memory key, touch [Change Custom Size Name], and then touch the key
to be renamed.
Océ cm3522/cm2522
11-15.
"System Settings" on
6
6-12